Find a Service Center
- 1.156 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 2 in |
| Spring Material | Carbon Steel |
| Seal Application | General Purpose |
| Solid | Yes |
| Pressure | 10 psi |
| Temperature Range [Max] | 250 °F |
| Case Material | Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Design | CRW1 |
| Seal Type | Oil |
| Case Design | Metal Case |
| Bore Sealant | Bore Tite |
| Overall Width | 0.25 in |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 3,600 ft/min |
| Spring Type | Garter |
| Shaft Dia. | 1.156 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Weight | 0.084 LB |
| EAN or UPC | 85311010009 |
