Find a Service Center
- 1.156 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Bore Sealant | Bore Tite |
| Operating Temperature [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Housing Bore Dia. | 2 in |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 1.156 in |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Spring Type | Garter |
| Design | CRW1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Material | Steel |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Seal Type | Oil |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Weight | 0.084 LB |
| EAN or UPC | 85311010009 |
