Find a Service Center
- 1.156 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Seal Application | General Purpose |
| Temperature Range [Max] | 400 °F |
| Operating Temperature [Max] | 390 °F |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Operating Temperature [Min] | -5 °F |
| Design | CRW1 |
| Shaft Dia. | 1.156 in |
| Construction | CRW1 |
| Surface Speed [Nom] | 1,363 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Installation | Housing Press Fit |
| Overall Width | 0.25 in |
| Spring Type | Garter |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 2 in |
| Inch/Metric | Inch |
| Bore Sealant | Bore Tite |
| Case Design | Metal Case |
| Case Material | Steel |
| Weight | 0.049 LB |
| EAN or UPC | 85311010023 |
