Find a Service Center
- 1.156 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Operating Temperature [Min] | -5 °F |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Housing Bore Dia. | 2 in |
| Overall Width | 0.25 in |
| Shaft Dia. | 1.156 in |
| Spring Type | Garter |
| Construction | CRW1 |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 1,363 ft/min |
| Installation | Housing Press Fit |
| Bore Sealant | Bore Tite |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 390 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Lip Style | Internal |
| Design | CRW1 |
| Lip Type | Single Lip |
| Case Material | Steel |
| Solid | Yes |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -40 °F |
| Case Design | Metal Case |
| Temperature Range [Max] | 400 °F |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.049 LB |
| EAN or UPC | 85311010023 |
