Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 2.062 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 1.188 in |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Inch |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Housing Bore Dia. | 2.062 in |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 0.25 in |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Max] | 225 °F |
| Construction | CRW1 |
| Surface Speed [Nom] | 1,401 ft/min |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.049 LB |
| EAN or UPC | 85311010696 |
