Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 2.062 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 1,401 ft/min |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 1.188 in |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Overall Width | 0.25 in |
| Speed | 0.07 ft/min |
| Design | CRW1 |
| Pressure | 10 psi |
| Seal Type | Oil |
| Case Design | Metal Case |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 2.062 in |
| Case Construction | Steel Case w/o Inner Case |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel Garter |
| Weight | 0.049 LB |
| EAN or UPC | 85311010696 |
