Find a Service Center
Alternate Products
- 1.344 in Shaft Diameter
- 2.106 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 1,585 ft/min |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Seal Design | SKF Wave |
| Shaft Dia. | 1.344 in |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Overall Width | 0.313 in |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Housing Bore Dia. | 2.106 in |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Case Material | Steel |
| Construction | CRW1 |
| Weight | 0.087 LB |
| EAN or UPC | 85311012218 |
