Find a Service Center
Alternate Products
- 1.344 in Shaft Diameter
- 2.106 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 1,585 ft/min |
| Lip Style | Internal |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Overall Width | 0.313 in |
| Construction | CRW1 |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 1.344 in |
| Design | CRW1 |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 2.106 in |
| Temperature Range [Min] | -65 °F |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Seal Design | SKF Wave |
| Solid | Yes |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Spring Type | Garter |
| Weight | 0.087 LB |
| EAN or UPC | 85311012218 |
