Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 15 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
caution
- Not generally for oil retention
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 2 in, 61 mm |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Design | HM11 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.005@2000 |
| Speed | 0.02 ft/min |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Surface Speed [Nom] | 870 ft/min |
| Seal Application | Dirt Exclusion And Grease Retention At Slower Speeds, Severe Conditions |
| Overall Width | 15 mm |
| Construction | HM11 |
| Pressure | 3 psi |
| Seal Design | Assembled Design |
| Lip Type | Single Lip |
| Inch/Metric | Metric |
| Case Design | Metal Case |
| Lubricant | Grease |
| Shaft Dia. | 1 in, 42 mm |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Weight | 0.111 LB |
| EAN or UPC | 85311017305 |
