Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 15 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
caution
- Not generally for oil retention
| Surface Speed [Nom] | 870 ft/min |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Inch/Metric | Metric |
| Solid | Yes |
| Construction | HM11 |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Overall Width | 15 mm |
| Lubricant | Grease |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.005@2000 |
| Lip Style | Internal |
| Seal Design | Assembled Design |
| Speed | 0.02 ft/min |
| Pressure | 3 psi |
| Case Design | Metal Case |
| Shaft Dia. | 1 in, 42 mm |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 2 in, 61 mm |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Design | HM11 |
| Temperature Range [Min] | -65 °F |
| Seal Application | Dirt Exclusion And Grease Retention At Slower Speeds, Severe Conditions |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.111 LB |
| EAN or UPC | 85311017305 |
