Find a Service Center
Alternate Products
- 2.313 in Shaft Diameter
- 3.125 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel |
| Seal Application | General Purpose |
| Shaft Dia. | 2.313 in |
| Construction | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Design | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Overall Width | 0.375 in |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 3.125 in |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Bore Sealant | Bore Tite |
| Lip Style | Internal |
| Solid | Yes |
| Spring Type | Garter |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Max] | 225 °F |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Surface Speed [Nom] | 2,727 ft/min |
| Seal Design | SKF Wave |
| Weight | 0.132 LB |
| EAN or UPC | 85311025515 |
