Find a Service Center
Alternate Products
- 2.313 in Shaft Diameter
- 3.125 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Spring Type | Garter |
| Shaft Dia. | 2.313 in |
| Case Material | Steel |
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Design | CRW1 |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Surface Speed [Nom] | 2,727 ft/min |
| Seal Type | Oil |
| Bore Sealant | Bore Tite |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.375 in |
| Lip Style | Internal |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 3.125 in |
| Pressure | 10 psi |
| Weight | 0.132 LB |
| EAN or UPC | 85311025515 |
