Find a Service Center
- 0.5 in Shaft Diameter
- 0.99 in Housing Bore Diameter
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 0.99 in, 25.07 mm |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Construction | HMS1 |
| Case Construction | Rubber Covered Steel Case |
| Seal Design | Bonded Design |
| Installation | Housing Press Fit |
| Design | HMS1 |
| Spring Type | Garter |
| Case Material | Steel |
| Operating Temperature [Max] | 210 °F |
| Overall Width | 0.25 in, 6.35 mm |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 0.5 in, 12.7 mm |
| Speed | 0.05 ft/min |
| Lip Style | Internal |
| Case Design | Metal Case |
| Solid | Yes |
| Pressure | 7 psi |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 250 °F |
| Weight | 0.066 LB |
| EAN or UPC | 85311003384 |
