Find a Service Center
- 0.5 in Shaft Diameter
- 0.99 in Housing Bore Diameter
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Installation | Housing Press Fit |
| Spring Type | Garter |
| Construction | HMS1 |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.05 ft/min |
| Pressure | 7 psi |
| Overall Width | 0.25 in, 6.35 mm |
| Solid | Yes |
| Lip Style | Internal |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 250 °F |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Housing Bore Dia. | 0.99 in, 25.07 mm |
| Lubricant | Oil or Grease |
| Shaft Dia. | 0.5 in, 12.7 mm |
| Design | HMS1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Rubber Covered Steel Case |
| Seal Design | Bonded Design |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Weight | 0.066 LB |
| EAN or UPC | 85311003384 |
