Find a Service Center
- 5.5 in Shaft Diameter
- 6.75 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.5 in |
| Design | CRWH1 |
| Solid | Yes |
| Lip Type | Single Lip |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Housing Bore Dia. | 6.75 in |
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Max] | 400 °F |
| Shaft Dia. | 5.5 in |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/Inner Case |
| Spring Type | Garter |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Max] | 390 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Case Design | Metal Case, Inner Case |
| Weight | 0.825 LB |
| EAN or UPC | 85311038188 |
