Find a Service Center
- 5.5 in Shaft Diameter
- 6.75 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Housing Bore Dia. | 6.75 in |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Seal Application | General Purpose |
| Overall Width | 0.5 in |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Max] | 390 °F |
| Temperature Range [Max] | 400 °F |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Seal Type | Oil |
| Spring Type | Garter |
| Construction | CRWH1 |
| Bore Sealant | Bore Tite |
| Case Design | Metal Case, Inner Case |
| Case Construction | Steel Case w/Inner Case |
| Case Material | Steel |
| Operating Temperature [Min] | -5 °F |
| Spring Material | Carbon Steel |
| Design | CRWH1 |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Design | SKF Wave |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Shaft Dia. | 5.5 in |
| Weight | 0.825 LB |
| EAN or UPC | 85311038188 |
