Find a Service Center
- 5.63 in Shaft Diameter
- 6.63 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Metal Case, Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Spring Type | Garter |
| Inch/Metric | Inch |
| Construction | CRWH1 |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 400 °F |
| Bore Sealant | Bore Tite |
| Overall Width | 0.5 in |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Housing Bore Dia. | 6.625 in |
| Shaft Dia. | 5.625 in |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Case Material | Steel |
| Design | CRWH1 |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -5 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 390 °F |
| Installation | Housing Press Fit |
| Weight | 0.52 LB |
| EAN or UPC | 85311038362 |
