Find a Service Center
- 5.63 in Shaft Diameter
- 6.63 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 6.625 in |
| Temperature Range [Max] | 400 °F |
| Solid | Yes |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Spring Type | Garter |
| Operating Temperature [Min] | -5 °F |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Case Material | Steel |
| Operating Temperature [Max] | 390 °F |
| Shaft Dia. | 5.625 in |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Construction | CRWH1 |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel |
| Temperature Range [Min] | -40 °F |
| Seal Design | SKF Wave |
| Design | CRWH1 |
| Overall Width | 0.5 in |
| Case Design | Metal Case, Inner Case |
| Seal Type | Oil |
| Weight | 0.52 LB |
| EAN or UPC | 85311038362 |
