Find a Service Center
Alternate Products
- 6.13 in Shaft Diameter
- 7.13 in Housing Bore Diameter
- 0.63 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.625 in |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Surface Speed [Nom] | 3,600 ft/min |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case, Inner Case |
| Spring Material | Carbon Steel |
| Seal Application | General Purpose |
| Construction | CRWH1 |
| Temperature Range [Min] | -40 °F |
| Seal Design | SKF Wave |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 7.125 in |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 6.125 in |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 225 °F |
| Design | CRWH1 |
| Spring Type | Garter |
| Weight | 0.615 LB |
| EAN or UPC | 85311038867 |
