Find a Service Center
Alternate Products
- 6.13 in Shaft Diameter
- 7.13 in Housing Bore Diameter
- 0.63 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRWH1 |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Overall Width | 0.625 in |
| Solid | Yes |
| Shaft Dia. | 6.125 in |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 7.125 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/Inner Case |
| Seal Type | Oil |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Design | CRWH1 |
| Speed | 0.07 ft/min |
| Seal Design | SKF Wave |
| Case Design | Metal Case, Inner Case |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 3,600 ft/min |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Weight | 0.615 LB |
| EAN or UPC | 85311038867 |
