Find a Service Center
- 0.75 in Shaft Diameter
- 1.124 in Housing Bore
- 0.188 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Material | Carbon Steel |
| Overall Width | 0.188 in |
| Lip Style | Internal |
| Shaft Dia. | 0.75 in |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Case Design | Metal Case |
| Seal Type | Oil |
| Spring Type | Garter |
| Seal Application | General Purpose |
| Case Material | Steel |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Pressure | 10 psi |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Housing Bore Dia. | 1.124 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 390 °F |
| Temperature Range [Max] | 400 °F |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Temperature Range [Min] | -40 °F |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -5 °F |
| Surface Speed [Nom] | 884 ft/min |
| Weight | 0.062 LB |
| EAN or UPC | 85311005531 |
