Find a Service Center
- 0.75 in Shaft Diameter
- 1.124 in Housing Bore
- 0.188 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 390 °F |
| Pressure | 10 psi |
| Temperature Range [Max] | 400 °F |
| Bore Sealant | Bore Tite |
| Lip Type | Single Lip |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRW1 |
| Temperature Range [Min] | -40 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.124 in |
| Overall Width | 0.188 in |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Case Material | Steel |
| Shaft Dia. | 0.75 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Construction | CRW1 |
| Surface Speed [Nom] | 884 ft/min |
| Solid | Yes |
| Weight | 0.062 LB |
| EAN or UPC | 85311005531 |
