Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Locking Device | Eccentric Locking Collar |
| End Type | Open End |
| Base Height | 17/32 in |
| Inch/Metric | Inch Bore |
| Dynamic Load Rating | 4900 lbf |
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 1.4375 in |
| Seal Type | Contact Seals |
| Housing Construction | 1 Piece |
| Static Load Rating [Max] | 2500 lbf |
| Bolt | 1/2 in |
| Shaft Dia. | 1.1875 in |
| Bolt Hole Spacing | 4 5/8 in |
| Bolt Holes | 2 |
| Overall Width | 1 31/32 in |
| Temperature Range [Max] | 250 °F |
| Bolt Hole Length | 15/16 in |
| Outer Ring Size | 206 |
| Bolt Hole Width | 9/16 in |
| Collar No. | S1103K |
| Housing Height | 3 5/32 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Material | Polymer |
| Bearing Type | Ball Bearing |
| Base Length | 6 3/16 in |
| Bearing Insert | G1103KRRB TDCF |
| Collar O.D. | 1 47/64 in |
| Series | RAK Series |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Base Width | 1 9/16 in |
| Weight | 1.19 LB |
| EAN or UPC | 87796180062 |
-
![HACCP Friendly]()
HACCP Friendly
