Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 9/16 in |
| Collar O.D. | 1 47/64 in |
| Lubrication | Relubricatable |
| Housing Material | Polymer |
| Bearing Design | Non-Expansion |
| Series | RAK Series |
| Housing Height | 3 5/32 in |
| Collar No. | S1103K |
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing | 4 5/8 in |
| Bolt Hole Length | 15/16 in |
| Seal Type | Contact Seals |
| Base Width | 1 9/16 in |
| Base Length | 6 3/16 in |
| Length Through Bore | 1.4375 in |
| Outer Ring Size | 206 |
| Bearing Type | Ball Bearing |
| Base Height | 17/32 in |
| End Type | Open End |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 1.1875 in |
| Overall Width | 1 31/32 in |
| Inch/Metric | Inch Bore |
| Bearing Insert | G1103KRRB TDCF |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt | 1/2 in |
| Bolt Holes | 2 |
| Static Load Rating [Max] | 2500 lbf |
| Dynamic Load Rating | 4900 lbf |
| Weight | 1.19 LB |
| EAN or UPC | 87796180062 |
-
![HACCP Friendly]()
HACCP Friendly
