Find a Service Center
- 0.75" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bearing Type | Ball Bearing |
| Base Length | 5 in |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 0.75 in |
| End Type | Open End |
| Bearing Insert | G1012KRRB TDCF |
| Seal Type | Contact Seals |
| Bolt Hole Spacing | 3 25/32 in |
| Base Width | 1 1/4 in |
| Series | RAS Series |
| Bolt Hole Length | 25/32 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt Hole Width | 7/16 in |
| Bolt Holes | 2 |
| Housing Construction | 1 Piece |
| Collar No. | S1012K |
| Base Height | 17/32 in |
| Dynamic Load Rating | 3200 lbf |
| Housing Height | 2 17/32 in |
| Bolt | 3/8 in |
| Locking Device | Eccentric Locking Collar |
| Collar O.D. | 1 5/16 in |
| Overall Width | 1 43/64 in |
| Outer Ring Size | 204 |
| Housing Material | Polymer |
| Length Through Bore | 1.34375 in |
| Bearing Design | Non-Expansion |
| Lubrication | Relubricatable |
| Inch/Metric | Inch Bore |
| Temperature Range [Max] | 250 °F |
| Static Load Rating [Max] | 1400 lbf |
| Weight | 0.824 LB |
| EAN or UPC | 87796180123 |
-
![HACCP Friendly]()
HACCP Friendly
