Find a Service Center
- 0.75" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Static Load Rating [Max] | 1400 lbf |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 3 25/32 in |
| Series | RAS Series |
| Housing Height | 2 17/32 in |
| Base Width | 1 1/4 in |
| Base Height | 17/32 in |
| Seal Type | Contact Seals |
| End Type | Open End |
| Outer Ring Size | 204 |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Base Length | 5 in |
| Lubrication | Relubricatable |
| Collar No. | S1012K |
| Bearing Design | Non-Expansion |
| Bearing Insert | G1012KRRB TDCF |
| Locking Device | Eccentric Locking Collar |
| Temperature Range [Max] | 250 °F |
| Housing Construction | 1 Piece |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt Hole Width | 7/16 in |
| Bolt Hole Length | 25/32 in |
| Housing Material | Polymer |
| Collar O.D. | 1 5/16 in |
| Shaft Dia. | 0.75 in |
| Inch/Metric | Inch Bore |
| Dynamic Load Rating | 3200 lbf |
| Length Through Bore | 1.34375 in |
| Overall Width | 1 43/64 in |
| Bolt | 3/8 in |
| Weight | 0.824 LB |
| EAN or UPC | 87796180123 |
-
![HACCP Friendly]()
HACCP Friendly
