Find a Service Center
Alternate Products
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir synthetic rubber pillow blocks are designed for domestic heating, air-conditioning, ventilating equipment, and many other applications where low-cost, light-duty, and noiseless operation are essential. All units are available with the RA-RR extended inner ring bearings with positive contact, land riding seals and self-locking collar. An initial supply of long-life grease is provided in the one-piece, nonrelubricatable housings made of high grade, durable, molded synthetic rubber. Rubber pillow blocks with provision for relubrication are designated as the RBG series. At slight additional cost, both can be supplied with a .050" to .062" thick, corrosion-resistant steel strap for applications requiring greater rigidity. When the strap is reqired, add the suffix U to the pillow block designated as RGBU.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Width | 1 3/8 in |
| Length Through Bore | 1.75 in |
| Bolt Holes | 2 |
| Collar No. | S1103K |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 4 1/2 in |
| Housing Material | Rubber |
| Lubrication | Relubricatable |
| Collar O.D. | 1 47/64 in |
| Bearing Insert | RA103RR |
| Housing Construction | 1 Piece |
| Series | RBG Series |
| End Type | Open End |
| Overall Width | 1 3/4 in |
| Seal Type | Contact Seals |
| Housing Radial Load | 90 lbf |
| Bearing Type | Ball Bearing |
| Housing Width | 3 3/16 in |
| Shaft Dia. | 1.1875 in |
| Base Length | 6 in |
| Pillow Block Type | Thru-Bolt |
| Inch/Metric | Inch Bore |
| Base Height | 3/4 in |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Housing Height | 3 5/32 in |
| Bolt Hole Width | 39/64 in |
| Mounted Unit Duty | Light-Duty |
| Weight | 1.368 LB |
| EAN or UPC | 87796058033 |
