Find a Service Center
Alternate Products
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir synthetic rubber pillow blocks are designed for domestic heating, air-conditioning, ventilating equipment, and many other applications where low-cost, light-duty, and noiseless operation are essential. All units are available with the RA-RR extended inner ring bearings with positive contact, land riding seals and self-locking collar. An initial supply of long-life grease is provided in the one-piece, nonrelubricatable housings made of high grade, durable, molded synthetic rubber. Rubber pillow blocks with provision for relubrication are designated as the RBG series. At slight additional cost, both can be supplied with a .050" to .062" thick, corrosion-resistant steel strap for applications requiring greater rigidity. When the strap is reqired, add the suffix U to the pillow block designated as RGBU.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Seal Type | Contact Seals |
| Series | RBG Series |
| Locking Device | Eccentric Locking Collar |
| Length Through Bore | 1.75 in |
| Bolt Hole Spacing | 4 1/2 in |
| Housing Height | 3 5/32 in |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Bearing Insert | RA103RR |
| Pillow Block Type | Thru-Bolt |
| Overall Width | 1 3/4 in |
| Mounted Unit Duty | Light-Duty |
| Collar O.D. | 1 47/64 in |
| Housing Radial Load | 90 lbf |
| Bolt Hole Width | 39/64 in |
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Base Width | 1 3/8 in |
| Inch/Metric | Inch Bore |
| End Type | Open End |
| Collar No. | S1103K |
| Shaft Dia. | 1.1875 in |
| Insert Type | Steel Insert |
| Housing Material | Rubber |
| Base Height | 3/4 in |
| Housing Width | 3 3/16 in |
| Base Length | 6 in |
| Housing Construction | 1 Piece |
| Weight | 1.368 LB |
| EAN or UPC | 87796058033 |
