Find a Service Center
Boston Gear
732-30F-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101872302
- 3 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Box Length | 9 in |
| Output Torque | 2902 lb-in |
| Bolt Center | 9 1/2 in x 6 1/8 in |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Output Shaft | Solid |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Worm Position | Universal |
| Ratio | 30:1 |
| Style | Right Angle |
| Torque Out @ 1750 rpm | 2902 in lb |
| Base Mounting Attachment | No Base |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Frame | N/A |
| Rated Efficiency | 81% |
| Output Torque @ RPM | 2902 in lb @ 1750 rpm, 3100 in lb @ 1150 rpm |
| Shaft Assembly Code | J |
| HP @ RPM | 3 hp @ 1800 rpm |
| Input HP @ RPM | 2.36 hp @ 1150 rpm, 3.3 hp @ 1750 rpm |
| Use With | 732 |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Center Distance Code | 732 |
| Max. Input HP @ 100 rpm | 0.3 hp |
| Input (Shaft or Bore) Size | 7/8 in |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Fan Cooled | Yes |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Reduction Type | Single |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Material | Cast Iron, Standard Paint |
| Output Speed | 58.3 rpm |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Input Motor HP | 3 |
| Motor Application | General Purpose |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 5 7/8 in |
| Torque Out @ 1150 rpm | 3100 in lb |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Media Mapping Output | J |
| Input Configuration | Shaft Input |
| Input Power Rating | 3.3 hp, 2.461 kW |
| Output Configuration | Right Output |
| Housing Material | Cast Iron |
| Frame Size | Shaft Input, Not a C-Face |
| Center Distance | 3.25 in |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Washdown Duty | No |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Box Height | 9 3/8 in |
| Lubrication | None |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output Bore Shaft Dia. | 1.375 in |
| Output Shaft Projection | Solid Right Output |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Series | 700 |
| Family Name | Std Unit |
| Weight | 66.1 LB |
| EAN or UPC | 781711534038 |
