Find a Service Center
Boston Gear
732-30F-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101872302
- 3 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Torque Out @ 1150 rpm | 3100 in lb |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Configuration | Right Output |
| Frame | N/A |
| Standard | AGMA Service Class I |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Torque Out @ 1750 rpm | 2902 in lb |
| Reduction Type | Single |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Worm Position | Universal |
| Input HP @ RPM | 2.36 hp @ 1150 rpm, 3.3 hp @ 1750 rpm |
| Center Distance Code | 732 |
| Material | Cast Iron, Standard Paint |
| Ratio | 30:1 |
| HP @ RPM | 3 hp @ 1800 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame Size | Shaft Input, Not a C-Face |
| Input Power Rating | 3.3 hp, 2.461 kW |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output Torque @ RPM | 2902 in lb @ 1750 rpm, 3100 in lb @ 1150 rpm |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Output Shaft Projection | Solid Right Output |
| Style | Right Angle |
| Input Motor HP | 3 |
| Output Torque | 2902 lb-in |
| Series | 700 |
| Family Name | Std Unit |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Bolt Center | 9 1/2 in x 6 1/8 in |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Output Bore Shaft Dia. | 1.375 in |
| Output Shaft | Solid |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Shaft Assembly Code | J |
| Housing Material | Cast Iron |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Media Mapping Output | J |
| Box Length | 9 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Center Distance | 3.25 in |
| Rated Efficiency | 81% |
| Washdown Duty | No |
| Max. Input HP @ 100 rpm | 0.3 hp |
| Fan Cooled | Yes |
| Box Width | 5 7/8 in |
| Use With | 732 |
| Input Configuration | Shaft Input |
| Motor Application | General Purpose |
| Output Speed | 58.3 rpm |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Lubrication | None |
| Box Height | 9 3/8 in |
| Weight | 66.1 LB |
| EAN or UPC | 781711534038 |
