Climax Metal

Climax Metal

PBDC-BL-075

mac

PBDC-BL-075 | PBDC-BL - Series 3/4 in Rigid Pillow Block With 2 Set Screws

Item #104741323

Ideal for applications requiring strong load support in limited mounting area. Solid Zinc die cast housing is non-corrosive and lightweight. Securely retains bearing by pressing the lip 360° over the outer race. Includes 2 set screws.

each

Compare

Climax Metal

PBPS-BR-075

mac

PBPS-BR-075 | PBPS-BR - Series 3/4 in Standard Pillow Block

Item #101590444

Two-Piece Housing has rust-proof plated finish. Can be mounted vertically or horizontally. Spring-lid oil cap can be positioned 4 ways. Porous flanged bronze bearing is press-fit in sturdy zinc die cast sphere with felt strip for lubrication. Include

each

Compare

Climax Metal

PBSS-UH-075

mac

PBSS-UH-075 | PBSS-UH - Series USDA & FDA Approved Self-Aligning Pillow Block

Item #104741326

USDA & FDA approved. For wash-down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Two-piece stainless steel housing units. Tolerates -60° to 1

each

Compare

Climax Metal

PBSS-UH-062

mac

PBSS-UH-062 | PBSS-UH - Series USDA & FDA Approved Self-Aligning Pillow Block

Item #104780347

USDA & FDA approved. For wash-down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Two-piece stainless steel housing units. Tolerates -60° to 1

each

Compare

Climax Metal

PBDC-BL-050

mac

PBDC-BL-050 | PBDC-BL - Series 1/2 in Rigid Pillow Block With 2 Set Screws

Item #101616082

Ideal for applications requiring strong load support in limited mounting area. Solid Zinc die cast housing is non-corrosive and lightweight. Securely retains bearing by pressing the lip 360° over the outer race. Includes 2 set screws.

each

Compare

Climax Metal

PBPS-BR-100

mac

PBPS-BR-100 | PBPS-BR - Series 1 in Standard Pillow Block

Item #104741724

Two-Piece Housing has rust-proof plated finish. Can be mounted vertically or horizontally. Spring-lid oil cap can be positioned 4 ways. Porous flanged bronze bearing is press-fit in sturdy zinc die cast sphere with felt strip for lubrication. Include

each

Compare

Climax Metal

PBUH-UH-050

mac

PBUH-UH-050 | PBUH-UH - Series UHMW-PE. USDA & FDA Approved Solid-Rigid Pillow Block

Item #104741793

Entire unit is UHMW-PE. USDA & FDA approved. -60° to 180° F temperature range. Ideal for wash down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact & abrasion

each

Compare

Climax Metal

PBSS-UH-100

mac

PBSS-UH-100 | 104780348

Item #104780348

1" ID PILLOW BLOCK BEARING - STNLS STEEL, UHMW BEARING

each

Compare

Climax Metal

PBPS-BL-100

mac

PBPS-BL-100 | PBPS-BL - Series 1 in Standard Pillow Block With 2 Set Screws

Item #101590321

Two-Piece Housing has rust-proof plated finish. Bearing insert is encased in non-conductive, oil resistant rubber liner which corrects up to 2° misalignment while reducing vibration & noise. Includes 2 set screws.

each

Compare

Climax Metal

PBPS-BR-062

mac

PBPS-BR-062 | PBPS-BR - Series 5/8 in Standard Pillow Block

Item #101589015

Two-Piece Housing has rust-proof plated finish. Can be mounted vertically or horizontally. Spring-lid oil cap can be positioned 4 ways. Porous flanged bronze bearing is press-fit in sturdy zinc die cast sphere with felt strip for lubrication. Include

each

Compare

Climax Metal

PBPH-BL-075

mac

PBPH-BL-075 | PBPH-BL - Series 3/4 in Heavy Gauge Pillow Block

Item #101589817

Heavy gauge two-piece housing has rust proof plated finish. Housing is crimped together at bolt holes. Bearing insert with 2 set screws has longer inner race for added load support. Extra thick non-conductive rubber liner corrects misalignment up to

each

Compare

Climax Metal

PBPS-BL-062

mac

PBPS-BL-062 | PBPS-BL - Series 5/8 in Standard Pillow Block With 2 Set Screws

Item #101590320

Two-Piece Housing has rust-proof plated finish. Bearing insert is encased in non-conductive, oil resistant rubber liner which corrects up to 2° misalignment while reducing vibration & noise. Includes 2 set screws.

each

Compare

Climax Metal

PBPS-BL-050

mac

PBPS-BL-050 | PBPS-BL - Series 1/2 in Standard Pillow Block With 2 Set Screws

Item #104780345

Two-Piece Housing has rust-proof plated finish. Bearing insert is encased in non-conductive, oil resistant rubber liner which corrects up to 2° misalignment while reducing vibration & noise. Includes 2 set screws.

each

Compare

Climax Metal

PBPH-BL-062

mac

PBPH-BL-062 | PBPH-BL - Series 5/8 in Heavy Gauge Pillow Block

Item #104742273

Heavy gauge two-piece housing has rust proof plated finish. Housing is crimped together at bolt holes. Bearing insert with 2 set screws has longer inner race for added load support. Extra thick non-conductive rubber liner corrects misalignment up to

each

Compare

Climax Metal

PBPS-BL-075

mac

PBPS-BL-075 | PBPS-BL - Series 3/4 in Standard Pillow Block With 2 Set Screws

Item #101630202

Two-Piece Housing has rust-proof plated finish. Bearing insert is encased in non-conductive, oil resistant rubber liner which corrects up to 2° misalignment while reducing vibration & noise. Includes 2 set screws.

each

Compare

Climax Metal

PBDC-BR-050

mac

PBDC-BR-050 | PBDC-BR - Series 1/2 in Rigid Pillow Block

Item #104780520

Porous bronze sleeve bearing press-fit in solid zinc die cast housing. Non-corrosive & lightweight with oil hole for lubrication. For use in light duty applications. Tolerates -5° to 220° F.

each

Compare

Climax Metal

PBUH-UH-075

mac

PBUH-UH-075 | PBUH-UH - Series UHMW-PE. USDA & FDA Approved Solid-Rigid Pillow Block

Item #104742512

Entire unit is UHMW-PE. USDA & FDA approved. -60° to 180° F temperature range. Ideal for wash down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact & abrasion

each

Compare

Climax Metal

PBDC-BR-062

mac

PBDC-BR-062 | PBDC-BR - Series 5/8 in Rigid Pillow Block

Item #104743506

Porous bronze sleeve bearing press-fit in solid zinc die cast housing. Non-corrosive & lightweight with oil hole for lubrication. For use in light duty applications. Tolerates -5° to 220° F.

each

Compare

Climax Metal

PBSS-UH-050

mac

PBSS-UH-050 | PBSS-UH - Series USDA & FDA Approved Self-Aligning Pillow Block

Item #104742272

USDA & FDA approved. For wash-down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Two-piece stainless steel housing units. Tolerates -60° to 1

each

Compare

Climax Metal

PBDC-BL-100

mac

PBDC-BL-100 | PBDC-BL - Series 1 in Rigid Pillow Block With 2 Set Screws

Item #104780519

Ideal for applications requiring strong load support in limited mounting area. Solid Zinc die cast housing is non-corrosive and lightweight. Securely retains bearing by pressing the lip 360° over the outer race. Includes 2 set screws.

each

Compare

Recent Searches

Recent Searches

Product Comparison

Climax Metal

Sort By

Sort By

Product Comparison

Sort and Filter (1)

Switch to {0} Site?

Add to Existing Auto-Replenish Order