Find a Service Center
Boston Gear
F718-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101350432
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Motor HP | 0.33 |
| Output (Shaft or Bore) Size | 7/8 in |
| Reduction Type | Single |
| Use With | 718 |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Box Length | 5 1/2 in |
| Media Mapping Style | F |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Bore Code | B5 |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Series | 700 |
| Output Torque | 527 lb-in |
| Torque Out @ 1150 rpm | 440 in lb |
| Output Torque @ RPM | 527 in lb @ 1750 rpm, 440 in lb @ 1150 rpm |
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Media Mapping Output | G |
| Base | No |
| Output Shaft Projection | Solid Left Output |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Ratio | 60:1 |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Box Height | 5 3/4 in |
| Lubrication | None |
| Fan Cooled | No |
| Housing Material | Cast Iron |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Worm Position | Universal |
| Frame | 56C |
| Input Configuration | C-Face Quilled |
| Rated Efficiency | 70% |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Frame Size | 56C |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Bore Shaft Dia. | 0.875 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Motor Application | General Purpose |
| Input HP @ RPM | 0.35 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Motor HP | 0.3333 hp |
| Standard | AGMA Service Class I |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Output Speed | 29.2 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Material | Cast Iron, Standard Paint |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Shaft Assembly Code | G |
| Center Distance | 1.75 in |
| Output Configuration | Left Output |
| Output Shaft | Solid |
| Base Mounting Attachment | No Base |
| Box Width | 5 1/32 in |
| Motor Frame Size | B556C |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Center Distance Code | 718 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Torque Out @ 1750 rpm | 527 in lb |
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Family Name | F |
| Weight | 19.1 LB |
| EAN or UPC | 781711519486 |
