Find a Service Center
Boston Gear
F718-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101350432
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Fan Cooled | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Standard | AGMA Service Class I |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Use With | 718 |
| Frame | 56C |
| Output Shaft | Solid |
| Frame Size | 56C |
| Box Height | 5 3/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Shaft Assembly Code | G |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Center Distance | 1.75 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output (Shaft or Bore) Size | 7/8 in |
| Rated Efficiency | 70% |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Base Mounting Attachment | No Base |
| Housing Material | Cast Iron |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Output Shaft Projection | Solid Left Output |
| Torque Out @ 1150 rpm | 440 in lb |
| Washdown Duty | No |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Worm Position | Universal |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Bore Code | B5 |
| Media Mapping Output | G |
| Output Bore Shaft Dia. | 0.875 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Ratio | 60:1 |
| Output Torque | 527 lb-in |
| Motor Frame Size | B556C |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Output Speed | 29.2 rpm |
| Base | No |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Input HP @ RPM | 0.35 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Style | Right Angle |
| Motor Application | General Purpose |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Media Mapping Style | F |
| Torque Out @ 1750 rpm | 527 in lb |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Output Configuration | Left Output |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Input Motor HP | 0.33 |
| Input Configuration | C-Face Quilled |
| Series | 700 |
| Box Length | 5 1/2 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Box Width | 5 1/32 in |
| Motor HP | 0.3333 hp |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Center Distance Code | 718 |
| Family Name | F |
| Output Torque @ RPM | 527 in lb @ 1750 rpm, 440 in lb @ 1150 rpm |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Input (Shaft or Bore) Size | 5/8 in |
| Weight | 19.1 LB |
| EAN or UPC | 781711519486 |
