Find a Service Center
Boston Gear
F7713-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809004
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Style | F |
| Motor Application | General Purpose |
| Base Mounting Attachment | No Base |
| Output Configuration | Left Output |
| Style | Right Angle |
| Torque Out @ 1750 rpm | 281 in lb |
| Base to Centerline of Output Shaft | 1.72 in |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Frame Size | 56C |
| Center Distance Code | 713 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Washdown Duty | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Bolt Pattern | 3.25 x 2 |
| Material | Cast Iron, Standard Paint |
| Input (Shaft or Bore) Size | 5/8 in |
| Motor Frame Size | B556C |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Motor HP | 3/4 hp |
| Ratio | 10:1 |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Bolt Center | 3 1/4" x 2" |
| Box Length | 4 1/4 in |
| Output Shaft | Solid |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Frame | 56C |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Standard | AGMA Service Class I |
| Input Motor HP | 0.75 |
| Use With | 713 |
| Output Torque | 281 lb-in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Worm Position | Universal |
| Output (Shaft or Bore) Size | 5/8 in |
| Center Distance | 1.33 in |
| Housing Material | Cast Iron |
| Rated Efficiency | 91% |
| Lubrication | None |
| Family Name | F |
| Box Height | 4 21/32 in |
| Series | 700 |
| Base | No |
| Box Width | 4.03 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Bore Code | B5 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Input Configuration | C-Face Quilled |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Torque Out @ 1150 rpm | 243 in lb |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Reduction Type | Single |
| Input HP @ RPM | 0.86 hp @ 1750 rpm, 0.51 hp @ 1150 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Output Torque @ RPM | 281 in lb @ 1750 rpm, 243 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Shaft Assembly Code | G |
| Media Mapping Output | G |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output Bore Shaft Dia. | 0.625 in |
| Fan Cooled | No |
| Output Shaft Projection | Solid Left Output |
| Output Speed | 175 rpm |
| Weight | 13.1 LB |
| EAN or UPC | 781711518731 |
