Boston Gear
F7713-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809004
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bore Code | B5 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Box Width | 4.03 in |
| Fan Cooled | No |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 5/8 in |
| Motor Frame Size | B556C |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Input HP @ RPM | 0.86 hp @ 1750 rpm, 0.51 hp @ 1150 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron |
| Ratio | 10:1 |
| Base to Centerline of Output Shaft | 1.72 in |
| Use With | 713 |
| Frame Size | 56C |
| Output Torque | 281 lb-in |
| Center Distance Code | 713 |
| Output Bore Shaft Dia. | 0.625 in |
| Base Mounting Attachment | No Base |
| Lubrication | None |
| Washdown Duty | No |
| Media Mapping Style | F |
| Style | Right Angle |
| Input Motor HP | 0.75 |
| Base | No |
| Output Torque @ RPM | 281 in lb @ 1750 rpm, 243 in lb @ 1150 rpm |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Rated Efficiency | 91% |
| Reduction Type | Single |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Box Height | 4 21/32 in |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Family Name | F |
| Box Length | 4 1/4 in |
| Bolt Center | 3 1/4" x 2" |
| Series | 700 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Center Distance | 1.33 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output Configuration | Left Output |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Motor Application | General Purpose |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Output Speed | 175 rpm |
| Motor HP | 3/4 hp |
| Frame | 56C |
| Shaft Assembly Code | G |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Standard | AGMA Service Class I |
| Torque Out @ 1750 rpm | 281 in lb |
| Output Shaft Projection | Solid Left Output |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Media Mapping Output | G |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Input Configuration | C-Face Quilled |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Torque Out @ 1150 rpm | 243 in lb |
| Bolt Pattern | 3.25 x 2 |
| Worm Position | Universal |
| Weight | 13.1 LB |
| EAN or UPC | 781711518731 |
