Skip to content Skip to navigation menu


F713-10-B5-G

700 Series C-Face Quilled Reducer

Item #101809004
each
    Shipment Options

Product details

  • 1.330" Center Distance
  • 10:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Output Torque @ RPM 281 in lb @ 1750 rpm, 243 in lb @ 1150 rpm
Box Width 4.03 in
Frame Size 56C
Bore Code B5
Base to Centerline of Output Shaft 1.72 in
Bolt Pattern 3.25 x 2
Torque Out @ 1150 rpm 243 in lb
Washdown Duty No
Max. Thrust Load @ RPM 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm
Max. Input HP @ 100 rpm 0.06 hp
Use With 713
Input HP @ RPM 0.86 hp @ 1750 rpm, 0.51 hp @ 1150 rpm
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Torque Out @ 1750 rpm 281 in lb
Shaft Assembly Code G
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Bolt Center Length x Bolt Center Width 3 1/4 in x 2 in
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Max. Overhung Load @ RPM 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm
Family Name F
Output RPM @ 1750 rpm Input 175 rpm
Input Configuration C-Face Quilled
Motor Application General Purpose
Base No
Housing Material Cast Iron
Ratio 10:1
Output (Shaft or Bore) Size 5/8 in
Output RPM @ Input RPM 175 rpm @ 1750 rpm
Worm Position Universal
Fan Cooled No
Motor HP 3/4 hp
Box Length 4 1/4 in
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Max. Thrust Load @ 1150 rpm 300 lb/in
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Box Height 4 21/32 in
Frame 56C
Bolt Center 3 1/4" x 2"
Center Distance 1.33 in
Input (Shaft or Bore) Size 5/8 in
HP @ RPM 0.75 hp @ 1800 rpm
Output Configuration Left Output
Max. Overhung Load @ 1750 rpm 200 lb/in
Base to Centerline of Input Shaft 3 1/16 in
Lubrication None
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Reduction Type Single Reduction
Weight 13.1 LB
EAN or UPC 781711518731
Close Compare List Open Compare List Toggle

Product Comparison