Find a Service Center
Boston Gear
F7713-10-B5-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848240
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Family Name | F |
| Housing Material | Cast Iron |
| Motor Frame Size | B556C |
| Use With | 713 |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Base | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output Configuration | Right Output |
| Motor HP | 3/4 hp |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Bore Code | B5 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Box Length | 4 1/4 in |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Frame Size | 56C |
| Media Mapping Output | J |
| Material | Cast Iron, Standard Paint |
| Frame | 56C |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Output Bore Shaft Dia. | 0.625 in |
| Media Mapping Style | F |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Output Shaft Projection | Solid Right Output |
| Style | Right Angle |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Bolt Pattern | 3.25 x 2 |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Output Speed | 175 rpm |
| Base to Centerline of Output Shaft | 1.72 in |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Torque Out @ 1150 rpm | 243 in lb |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Lubrication | None |
| Center Distance | 1.33 in |
| Series | 700 |
| Rated Efficiency | 91% |
| Input Motor HP | 0.75 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Shaft Assembly Code | J |
| Fan Cooled | No |
| Torque Out @ 1750 rpm | 281 in lb |
| Output Shaft | Solid |
| Center Distance Code | 713 |
| Output Torque @ RPM | 281 in lb @ 1750 rpm, 243 in lb @ 1150 rpm |
| Washdown Duty | No |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Ratio | 10:1 |
| Output (Shaft or Bore) Size | 5/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Input Configuration | C-Face Quilled |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Box Width | 4.03 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Motor Application | General Purpose |
| Output Torque | 281 lb-in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Bolt Center | 3 1/4" x 2" |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Box Height | 4 21/32 in |
| Base Mounting Attachment | No Base |
| Worm Position | Universal |
| Input HP @ RPM | 0.86 hp @ 1750 rpm, 0.51 hp @ 1150 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Weight | 13.1 LB |
| EAN or UPC | 781711518755 |
