Find a Service Center
Boston Gear
F7713-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805901
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input (Shaft or Bore) Size | 5/8 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Base | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Media Mapping Style | F |
| Housing Material | Cast Iron |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Shaft Assembly Code | H |
| Motor Application | General Purpose |
| Output Torque | 305 lb-in |
| Input Configuration | C-Face Quilled |
| Media Mapping Output | H |
| Family Name | F |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Center Distance | 1.33 in |
| Input Motor HP | 0.50 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Motor Frame Size | B556C |
| Ratio | 15:1 |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Box Length | 4 1/4 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Material | Cast Iron, Standard Paint |
| Keyway Size | 3/16 x 3/32 |
| Input HP @ RPM | 0.37 hp @ 1150 rpm, 0.66 hp @ 1750 rpm |
| Frame | 56C |
| Box Width | 4.03 in |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Output Configuration | Left & Right Output |
| Output (Shaft or Bore) Size | 5/8 in |
| Torque Out @ 1150 rpm | 262 in lb |
| Output Bore Shaft Dia. | 0.625 in |
| Box Height | 4 21/32 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Frame Size | 56C |
| Bolt Center | 3 1/4" x 2" |
| Fan Cooled | No |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Washdown Duty | No |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Standard | AGMA Service Class II |
| Output Shaft | Solid |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Rated Efficiency | 86% |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Reduction Type | Single |
| Output Speed | 116.7 rpm |
| Bore Code | B5 |
| Output Torque @ RPM | 262 in lb @ 1150 rpm, 305 in lb @ 1750 rpm |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Use With | 713 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Worm Position | Universal |
| Series | 700 |
| Motor HP | 1/2 hp |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Center Distance Code | 713 |
| Torque Out @ 1750 rpm | 305 in lb |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Weight | 13.1 LB |
| EAN or UPC | 781711518779 |
