Boston Gear
F7713-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805901
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1750 rpm | 305 in lb |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Housing Material | Cast Iron |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Input Motor HP | 0.50 |
| Ratio | 15:1 |
| Bolt Center | 3 1/4" x 2" |
| Output Bore Shaft Dia. | 0.625 in |
| Lubrication | None |
| Standard | AGMA Service Class II |
| Series | 700 |
| Motor Application | General Purpose |
| Use With | 713 |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Box Width | 4.03 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Keyway Size | 3/16 x 3/32 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Media Mapping Style | F |
| Output Speed | 116.7 rpm |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Center Distance | 1.33 in |
| Frame Size | 56C |
| Washdown Duty | No |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Configuration | Left & Right Output |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Style | Right Angle |
| Bore Code | B5 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Center Distance Code | 713 |
| Motor Frame Size | B556C |
| Family Name | F |
| Frame | 56C |
| Torque Out @ 1150 rpm | 262 in lb |
| Input (Shaft or Bore) Size | 5/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor HP | 1/2 hp |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Box Height | 4 21/32 in |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Output Torque | 305 lb-in |
| Reduction Type | Single |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Shaft Assembly Code | H |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output (Shaft or Bore) Size | 5/8 in |
| Fan Cooled | No |
| Input HP @ RPM | 0.37 hp @ 1150 rpm, 0.66 hp @ 1750 rpm |
| Worm Position | Universal |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Media Mapping Output | H |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Box Length | 4 1/4 in |
| Output Shaft | Solid |
| Output Torque @ RPM | 262 in lb @ 1150 rpm, 305 in lb @ 1750 rpm |
| Rated Efficiency | 86% |
| Base | No |
| Weight | 13.1 LB |
| EAN or UPC | 781711518779 |
