Find a Service Center
Boston Gear
F7713-15-B5-J
700 Series 15:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101342536
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Motor HP | 1/2 hp |
| Lubrication | None |
| Reduction Type | Single |
| Output (Shaft or Bore) Size | 5/8 in |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Housing Material | Cast Iron |
| Box Height | 4 21/32 in |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Center Distance Code | 713 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output Torque @ RPM | 305 in lb @ 1750 rpm, 262 in lb @ 1150 rpm |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Base to Centerline of Output Shaft | 1.72 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Center Distance | 1.33 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Box Length | 4 1/4 in |
| Bore Code | B5 |
| Standard | AGMA Service Class II |
| Input Configuration | C-Face Quilled |
| Motor Frame Size | B556C |
| Input (Shaft or Bore) Size | 5/8 in |
| Input HP @ RPM | 0.66 hp @ 1750 rpm, 0.37 hp @ 1150 rpm |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Base | No |
| Keyway Size | 3/16 x 3/32 |
| Output Shaft Projection | Solid Right Output |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Torque Out @ 1150 rpm | 262 in lb |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Input Motor HP | 0.50 |
| Motor Application | General Purpose |
| Ratio | 15:1 |
| Rated Efficiency | 86% |
| Use With | 713 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Torque Out @ 1750 rpm | 305 in lb |
| Bolt Center | 3 1/4" x 2" |
| Box Width | 4.03 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Frame | 56C |
| Shaft Assembly Code | J |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Style | Right Angle |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Output Torque | 305 lb-in |
| Media Mapping Output | J |
| Output Shaft | Solid |
| Series | 700 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Frame Size | 56C |
| Base Mounting Attachment | No Base |
| Family Name | F |
| Output Speed | 116.7 rpm |
| Output Configuration | Right Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Media Mapping Style | F |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Worm Position | Universal |
| Output Bore Shaft Dia. | 0.625 in |
| Bolt Pattern | 3.25 x 2 |
| Fan Cooled | No |
| Weight | 13.1 LB |
| EAN or UPC | 781711518786 |
