Find a Service Center
Boston Gear
F7713-15-B5-J
700 Series 15:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101342536
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Motor Application | General Purpose |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Keyway Size | 3/16 x 3/32 |
| Style | Right Angle |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Rated Efficiency | 86% |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Motor Frame Size | B556C |
| Ratio | 15:1 |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Box Length | 4 1/4 in |
| Reduction Type | Single |
| Box Height | 4 21/32 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Bore Code | B5 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Series | 700 |
| Output Speed | 116.7 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Worm Position | Universal |
| Output Shaft | Solid |
| Fan Cooled | No |
| Torque Out @ 1750 rpm | 305 in lb |
| Box Width | 4.03 in |
| Frame Size | 56C |
| Output Torque | 305 lb-in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Family Name | F |
| Bolt Pattern | 3.25 x 2 |
| Material | Cast Iron, Standard Paint |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron |
| Standard | AGMA Service Class II |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Media Mapping Style | F |
| Input Motor HP | 0.50 |
| Bolt Center | 3 1/4" x 2" |
| Output Shaft Projection | Solid Right Output |
| Shaft Assembly Code | J |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Lubrication | None |
| Base Mounting Attachment | No Base |
| Output Configuration | Right Output |
| Use With | 713 |
| Input HP @ RPM | 0.66 hp @ 1750 rpm, 0.37 hp @ 1150 rpm |
| Center Distance Code | 713 |
| Output Bore Shaft Dia. | 0.625 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Media Mapping Output | J |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output Torque @ RPM | 305 in lb @ 1750 rpm, 262 in lb @ 1150 rpm |
| Base | No |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Motor HP | 1/2 hp |
| Torque Out @ 1150 rpm | 262 in lb |
| Center Distance | 1.33 in |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Weight | 13.1 LB |
| EAN or UPC | 781711518786 |
