Find a Service Center
Boston Gear
F7713-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805902
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Lubrication | None |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Frame Size | 56C |
| Center Distance | 1.33 in |
| Motor Frame Size | B556C |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Torque Out @ 1750 rpm | 307 in lb |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Media Mapping Output | H |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output (Shaft or Bore) Size | 5/8 in |
| Fan Cooled | No |
| Style | Right Angle |
| Base | No |
| Input Configuration | C-Face Quilled |
| Box Length | 4 1/4 in |
| Box Height | 4 21/32 in |
| Use With | 713 |
| Motor Application | General Purpose |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Input Motor HP | 0.25 |
| Media Mapping Style | F |
| Bolt Center | 3 1/4" x 2" |
| Torque Out @ 1150 rpm | 265 in lb |
| Series | 700 |
| Max. Input HP @ 100 rpm | 0.025 hp |
| Motor HP | 0.1667 hp |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 69% |
| Family Name | F |
| Shaft Assembly Code | H |
| Output Speed | 43.8 rpm |
| Output Torque | 307 lb-in |
| Output Configuration | Left & Right Output |
| Worm Position | Universal |
| Output Shaft | Solid |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Ratio | 40:1 |
| Box Width | 4.03 in |
| Output Torque @ RPM | 265 in lb @ 1150 rpm, 307 in lb @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Input Power Rating | 0.31 hp, 0.231 kW |
| Base to Centerline of Output Shaft | 1.72 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Center Distance Code | 713 |
| Frame | 56C |
| Input HP @ RPM | 0.18 hp @ 1150 rpm, 0.31 hp @ 1750 rpm |
| Standard | AGMA Service Class II |
| Output Bore Shaft Dia. | 0.625 in |
| Bore Code | B5 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Input (Shaft or Bore) Size | 5/8 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Weight | 13.1 LB |
| EAN or UPC | 781711518892 |
