Find a Service Center
Boston Gear
F7713-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805902
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center | 3 1/4" x 2" |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Motor Application | General Purpose |
| Family Name | F |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Washdown Duty | No |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Rated Efficiency | 69% |
| Base | No |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Box Width | 4.03 in |
| Motor Frame Size | B556C |
| Torque Out @ 1750 rpm | 307 in lb |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Frame | 56C |
| Ratio | 40:1 |
| Output Bore Shaft Dia. | 0.625 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Base Mounting Attachment | No Base |
| Output Shaft Projection | Solid Double Projecting Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Input Motor HP | 0.25 |
| Media Mapping Output | H |
| Base to Centerline of Output Shaft | 1.72 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Worm Position | Universal |
| Box Height | 4 21/32 in |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | H |
| Center Distance | 1.33 in |
| Use With | 713 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Power Rating | 0.31 hp, 0.231 kW |
| Output Speed | 43.8 rpm |
| Output Configuration | Left & Right Output |
| Housing Material | Cast Iron |
| Output Torque | 307 lb-in |
| Output (Shaft or Bore) Size | 5/8 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Input HP @ RPM | 0.18 hp @ 1150 rpm, 0.31 hp @ 1750 rpm |
| Bore Code | B5 |
| Output Torque @ RPM | 265 in lb @ 1150 rpm, 307 in lb @ 1750 rpm |
| Standard | AGMA Service Class II |
| Center Distance Code | 713 |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Box Length | 4 1/4 in |
| Frame Size | 56C |
| Lubrication | None |
| Reduction Type | Single |
| Torque Out @ 1150 rpm | 265 in lb |
| Series | 700 |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Motor HP | 0.1667 hp |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.025 hp |
| Fan Cooled | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Media Mapping Style | F |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Weight | 13.1 LB |
| EAN or UPC | 781711518892 |
