Find a Service Center
Boston Gear
F7715-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807802
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Bore Shaft Dia. | 0.75 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Bore Code | B5 |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Output (Shaft or Bore) Size | 3/4 in |
| Output Configuration | Left Output |
| Input Configuration | C-Face Quilled |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Lubrication | None |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Family Name | F |
| Worm Position | Universal |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Input HP @ RPM | 1.2 hp @ 1750 rpm, 0.73 hp @ 1150 rpm |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Frame | 56C |
| Base | No |
| Housing Material | Cast Iron |
| Box Width | 5 1/16 in |
| Material | Cast Iron, Standard Paint |
| HP @ RPM | 1 hp @ 1800 rpm |
| Use With | 715 |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base Mounting Attachment | No Base |
| Base to Centerline of Output Shaft | 1.91 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Center Distance | 1.54 in |
| Motor Application | General Purpose |
| Output Speed | 175 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Media Mapping Output | G |
| Series | 700 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Reduction Type | Single |
| Rated Efficiency | 92% |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Box Length | 5 1/8 in |
| Shaft Assembly Code | G |
| Box Height | 5 3/8 in |
| Output Torque @ RPM | 397 in lb @ 1750 rpm, 350 in lb @ 1150 rpm |
| Output Shaft | Solid |
| Style | Right Angle |
| Ratio | 10:1 |
| Media Mapping Style | F |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Center Distance Code | 715 |
| Torque Out @ 1750 rpm | 397 in lb |
| Input Motor HP | 1 |
| Torque Out @ 1150 rpm | 350 in lb |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 5/8 in |
| Standard | AGMA Service Class I |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor Frame Size | B556C |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Torque | 397 lb-in |
| Motor HP | 1 hp |
| Frame Size | 56C |
| Fan Cooled | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Shaft Projection | Solid Left Output |
| Weight | 17.1 LB |
| EAN or UPC | 781711519004 |
