Find a Service Center
Boston Gear
F7715-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807802
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output RPM @ 1750 rpm Input | 175 rpm |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Rated Efficiency | 92% |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output (Shaft or Bore) Size | 3/4 in |
| Fan Cooled | No |
| Output Speed | 175 rpm |
| Output Shaft | Solid |
| Style | Right Angle |
| Material | Cast Iron, Standard Paint |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Motor Frame Size | B556C |
| Shaft Assembly Code | G |
| Base to Centerline of Input Shaft | 3 7/16 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Center Distance Code | 715 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Media Mapping Style | F |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Frame | 56C |
| Use With | 715 |
| Center Distance | 1.54 in |
| Input HP @ RPM | 1.2 hp @ 1750 rpm, 0.73 hp @ 1150 rpm |
| Output Configuration | Left Output |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Base Mounting Attachment | No Base |
| Media Mapping Output | G |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Ratio | 10:1 |
| Output Torque @ RPM | 397 in lb @ 1750 rpm, 350 in lb @ 1150 rpm |
| Box Height | 5 3/8 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Torque Out @ 1150 rpm | 350 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Torque Out @ 1750 rpm | 397 in lb |
| Washdown Duty | No |
| Lubrication | None |
| Housing Material | Cast Iron |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Bore Shaft Dia. | 0.75 in |
| Box Width | 5 1/16 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Box Length | 5 1/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Series | 700 |
| Worm Position | Universal |
| Motor HP | 1 hp |
| Input Configuration | C-Face Quilled |
| Output Torque | 397 lb-in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Input Motor HP | 1 |
| Base | No |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Frame Size | 56C |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Family Name | F |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Bore Code | B5 |
| Weight | 17.1 LB |
| EAN or UPC | 781711519004 |
