Find a Service Center
Boston Gear
F7715-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809376
- 0.5 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1750 rpm | 446 in lb |
| Motor HP | 0.3333 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Standard | AGMA Service Class I |
| Input Motor HP | 0.50 |
| Use With | 715 |
| Fan Cooled | No |
| Output Bore Shaft Dia. | 0.75 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Output (Shaft or Bore) Size | 3/4 in |
| Material | Cast Iron, Standard Paint |
| Torque Out @ 1150 rpm | 388 in lb |
| Motor Frame Size | B556C |
| Center Distance | 1.54 in |
| Output Torque @ RPM | 388 in lb @ 1150 rpm, 446 in lb @ 1750 rpm |
| Housing Material | Cast Iron |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Media Mapping Style | F |
| Shaft Assembly Code | H |
| Worm Position | Universal |
| Output Torque | 445 lb-in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Motor Application | General Purpose |
| Input Configuration | C-Face Quilled |
| Ratio | 30:1 |
| Box Height | 5 3/8 in |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Configuration | Left & Right Output |
| Style | Right Angle |
| Output Shaft | Solid |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Frame | 56C |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Max. Input HP @ 100 rpm | 0.04 hp |
| Family Name | F |
| Input (Shaft or Bore) Size | 5/8 in |
| Base | No |
| Input HP @ RPM | 0.31 hp @ 1150 rpm, 0.54 hp @ 1750 rpm |
| Box Width | 5 1/16 in |
| Output Speed | 58.3 rpm |
| Washdown Duty | No |
| Keyway Size | 3/16 x 3/32 |
| Input Power Rating | 0.54 hp, 0.403 kW |
| Media Mapping Output | H |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Base to Centerline of Output Shaft | 1.91 in |
| Bore Code | B5 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| HP @ RPM | 0.25 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Lubrication | None |
| Output Shaft Projection | Solid Double Projecting Output |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Reduction Type | Single |
| Frame Size | 56C |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Rated Efficiency | 76% |
| Center Distance Code | 715 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Box Length | 5 1/8 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519134 |
