Find a Service Center
Boston Gear
F715-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835991
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Keyway Size | 3/16 x 3/32 |
| Center Distance | 1.54 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Media Mapping Style | F |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Style | Right Angle |
| Fan Cooled | No |
| Bore Code | B5 |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Input Motor HP | 0.33 |
| Output Shaft | Solid |
| Housing Material | Cast Iron |
| Ratio | 40:1 |
| Worm Position | Universal |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Output Torque | 442 lb-in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Use With | 715 |
| Output (Shaft or Bore) Size | 3/4 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Box Length | 5 1/8 in |
| Base | No |
| Torque Out @ 1750 rpm | 441 in lb |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Center Distance Code | 715 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Output Speed | 43.8 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Frame | 56C |
| Base Mounting Attachment | No Base |
| Media Mapping Output | J |
| Motor HP | 0.3333 hp |
| Series | 700 |
| Input Configuration | C-Face Quilled |
| Reduction Type | Single |
| Box Height | 5 3/8 in |
| Standard | AGMA Service Class II |
| Box Width | 5 1/16 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Torque Out @ 1150 rpm | 380 in lb |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Motor Frame Size | B556C |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Lubrication | None |
| Output Configuration | Right Output |
| Output Shaft Projection | Solid Right Output |
| Frame Size | 56C |
| Family Name | F |
| Rated Efficiency | 71% |
| Shaft Assembly Code | J |
| Weight | 17.1 LB |
| EAN or UPC | 781711519172 |
