Find a Service Center
Boston Gear
F7715-5-B7-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807799
- 1.50 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Motor Frame Size | B7140TC180C |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Box Height | 5 3/8 in |
| Box Length | 5 1/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Input HP @ RPM | 1.15 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Family Name | F |
| Torque Out @ 1750 rpm | 291 in lb |
| Use With | 715 |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Torque Out @ 1150 rpm | 285 in lb |
| Ratio | 5:1 |
| Standard | AGMA Service Class I |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Output Configuration | Left Output |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Base | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Frame Size | 140TC, 180C |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Rated Efficiency | 94% |
| Output Speed | 350 rpm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Lubrication | None |
| Output Shaft | Solid |
| Reduction Type | Single |
| Output Shaft Projection | Solid Left Output |
| Input Motor HP | 1.50 |
| Center Distance Code | 715 |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Center Distance | 1.54 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Bore Shaft Dia. | 0.75 in |
| Frame | 140TC, 180C |
| Media Mapping Output | G |
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Style | Right Angle |
| Shaft Assembly Code | G |
| Output Torque | 291 lb-in |
| Series | 700 |
| Box Width | 5 1/16 in |
| Motor HP | 1 1/2 hp |
| Output Torque @ RPM | 285 in lb @ 1150 rpm, 291 in lb @ 1750 rpm |
| Bore Code | B7 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Keyway Size | 3/16 x 3/32 |
| Output (Shaft or Bore) Size | 3/4 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Configuration | C-Face Quilled |
| Motor Application | General Purpose |
| Base Mounting Attachment | No Base |
| Fan Cooled | No |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 1.91 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Weight | 17.1 LB |
| EAN or UPC | 781711518977 |
