Find a Service Center
Boston Gear
F7718-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809377
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Use With | 718 |
| Motor Frame Size | B556C |
| Frame Size | 56C |
| Family Name | F |
| Output Torque | 536 lb-in |
| Input (Shaft or Bore) Size | 5/8 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Torque Out @ 1150 rpm | 480 in lb |
| Box Length | 5 1/2 in |
| Output (Shaft or Bore) Size | 7/8 in |
| Output Configuration | Left Output |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Fan Cooled | No |
| Ratio | 10:1 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Shaft Assembly Code | G |
| Output Shaft Projection | Solid Left Output |
| Rated Efficiency | 92% |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Input Motor HP | 1.50 |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Worm Position | Universal |
| Output Speed | 175 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Housing Material | Cast Iron |
| Output Shaft | Solid |
| Center Distance | 1.75 in |
| Base | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Material | Cast Iron, Standard Paint |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Style | Right Angle |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Motor HP | 1 hp |
| Media Mapping Style | F |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Lubrication | None |
| Series | 700 |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Center Distance Code | 718 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Standard | AGMA Service Class I |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Washdown Duty | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Torque @ RPM | 536 in lb @ 1750 rpm, 480 in lb @ 1150 rpm |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Reduction Type | Single |
| Box Width | 5 1/32 in |
| Output Bore Shaft Dia. | 0.875 in |
| Input HP @ RPM | 1.61 hp @ 1750 rpm, 0.98 hp @ 1150 rpm |
| Box Height | 5 3/4 in |
| Media Mapping Output | G |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Input Configuration | C-Face Quilled |
| Base Mounting Attachment | No Base |
| Torque Out @ 1750 rpm | 536 in lb |
| Bore Code | B5 |
| Weight | 19.1 LB |
| EAN or UPC | 781711519271 |
| NSN Number | 6105-01-361-5406 |
