Find a Service Center
Boston Gear
F718-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101653057
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Do not exceed maximum primary pressure rating, as product could rupture and cause injury
- Do not connect regulator to bottled gas
| Box Width | 5 1/32 in |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Base | No |
| Bore Code | B7 |
| Output Speed | 175 rpm |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Lubrication | None |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Fan Cooled | No |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Ratio | 10:1 |
| Output Configuration | Left Output |
| Output Torque | 536 lb-in |
| Media Mapping Output | G |
| Standard | AGMA Service Class I |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Style | Right Angle |
| Housing Material | Cast Iron |
| Input Motor HP | 1.50 |
| Box Height | 5 3/4 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output Shaft Projection | Solid Left Output |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Torque Out @ 1150 rpm | 480 in lb |
| Center Distance | 1.75 in |
| Material | Cast Iron, Standard Paint |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Use With | 718 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Media Mapping Style | F |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Torque Out @ 1750 rpm | 536 in lb |
| Shaft Assembly Code | G |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Reduction Type | Single |
| Worm Position | Universal |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Motor Frame Size | B7140TC180C |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Family Name | F |
| Frame | 140TC, 180C |
| Box Length | 5 1/2 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Bore Shaft Dia. | 0.875 in |
| Motor HP | 1 1/2 hp |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output (Shaft or Bore) Size | 7/8 in |
| Center Distance Code | 718 |
| Rated Efficiency | 92% |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Shaft | Solid |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Configuration | C-Face Quilled |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Frame Size | 140TC, 180C |
| Weight | 19.1 LB |
| EAN or UPC | 781711525791 |
